Fraunhofer Institute for Silicate Research ISC
Fraunhofer Institute for Silicate Research ISC

Proceedings

Expand all Close all

2019

  • Diegeler, A.:
    THERMO-OPTICAL-MEASURING TECHNIQUE (TOM) - A high efficient tool in Clean Coal Technologies to increase the efficiency of coal combustion and minimize emissions
     
  • Diegeler, A.:
    Characterisation of Additive Manufactured PM Parts Using Thermo-Optical Measuring Technique
     
  • Diegeler, A.:
    Optical detection and structural analysis of creep behavior during sintering of ceramic parts using the versatile Thermo-Optical-Measurement technique TOM
     
  • Diegeler, A.:
    Aspects of corrosion and slagging in cofired biomass power plant characterized by Thermo-Optical Measurement technique

  • Hong, M.P., Sang, Il K., Kim, J.H., Yoon, H.W., Jang, Y.S., Shin, S.M., Ryu, Y., Kim, D.H, Choi, D.K., Rhie, K., Yun, C. J., Kim, J., Cheong, B.H Park, T.S., Park, T., Kim, D.H., Song, J.Y., Kim, Y., Bae, B.S., Kang, I.H., Popall, M., Domann, G., Kim:
    Novel Process Technologies for Stretchable OLED
    Tagungsband, IMID 2019, The 19th Intern. Meeting on Information Display, HICO
    Gyeongju, Korea, 27.–30.8.2019

  • Kampik, D., Tarau, I., Han, H., Walles, H., Groeber-Becker, F., Hillenkamp, J., Lotz, C.:
    A 3D-hemi-cornea wound healing model for pre-clinical testing.
    ARVO Annual Meeting Progam Summary, 249 (2019)

  • Kolb, C., Wolter, H.:
    Additive Fertigung von biokompatiblen Harz-basierten Materialsystemen.
    Tagungsband: Kongress: Rapid.Tech, 25.-27. Juni 2019 Erfurt (2019)

  • Lange, K., Bahattab, M. A., Alqahtani, S. H., Mirza, M., Glaubitt, W., Naumann, V., Hagendorf, C, Ilse, K.:
    Combined Soiling and Abrasion Testing of Antisoiling Coatings
    IEEE Journal of Photovoltaics, vol. 10, no. 1, pp. 243-249, Jan. 2020. 

  • Lotz, C., Kieswetter, L., Hansmann, J., Walles, H., Groeber-Becker, F.:
    Impedance spectroscopy as a method to discriminate between all GHS categories for eye irritation in vitro.
    Toxicology Letters 314(S1), S304-305 (2019)

  • Lotz, C., Seliger, R., Littau, L., Akyuerek, D., Groeber-Becker, F.:
    Transdifferentiating reconstructed human epidermis (RHE) to corneal epithelium through retinoic acid.
    ARVO Annual Meeting Progam Summary, 250 (2019)

  • Mathew, S., Cubukova, A., Metzger, M., Appelt-Menzel, A., Oerter, S.:
    Development of an isogenic blood brain barrier spheroid model
    Fluids Barriers CNS 2019, 16(2): A11
    Published online 11.9.2019

  • Reigl A., Groeber-Becker F., Friebe A., Groneberg D.:
    NO-GC in pericytes as modulator of skin fibrosis
    Journal of Translational Medicine 2019, 17(2): P13 9th International Conference on cGMP: Generators, Effectors and Therapeutic Implications

  • Reigl A., Groeber-Becker F., Friebe A., Groneberg D.:
    NO-GC Expression in muriner Haut und humanen 3D-Vollhautäquivalente.
    WUNDmanagement 68(62), 13-Suppl. WUKO 2019

  • Settelein, J., Wulfert-Holzmann, P.:
    Projektband, Projekt "Innovative Materialien für stationäre Blei-Säure-Batterien, AddESun"
    3. Statusseminar InnoEMat, Dresden, 18.–20.9.2019

  • Stadlober, B., Groten, J, Schäffner, Ph., Zirkl, M., Tschepp, A., Adler, M.,  Abu Ali, T.,  Amon, C., Belegratis, M., Maurer, D., (Joanneum Research); Collin, D., Domann, G. (ISC):
    Ferroelectric Polymer Sensors for Flexible Electronics
    Organic&Hybrid Sensors and Bioelectronics XII, part of SPIE Organic Photonics + Electronics 2019

  • Stier, S.:
    Multimodale und integrierte Elastomersensorik
    In: Martin Wiedemann und Tobias Melz (Hg.): Smarte Strukturen und Systeme. Tagungsband des 4SMARTS-Symposiums 22.–23.5.2019, Darmstadt. 1. Auflage. Düren: Shaker, S. 117–128.

  • Suresh Nair, S., Heinrich, A., Klein, M., Steenhusen, S.:
    Additive Manufacturing of Photoluminescent Optics
    Proceedings, SPIE, Photonics West 2019
    San Francisco, 2.–7. Februar 2019

2018

  • Auerbach, R., Bokelmann, K., Stauber, R., Schnell, S., Ratering, S., Werner, A., Haseneder, R., Vostal, R., Bertau, M., Gellermann, C.:
    Bioleaching zum Recycling von Sekundärrohstoffen.
    Chemie in unserer Zeit 52(5), 330-340 (2018)
  • Auerbach, R., Ratering, S., Bokelmann, K., Gellermann, C., Brämer, T., Baumann, R., Schnell, S.:
    Bioleaching of valuable and hazardous metals from dry discharged incineration slag. An approach for metal recycling and pollutant elimination.
    Journal of Environmental Management 232, 428-437 (2018)
  • Auerbach, R., Bokelmann, K., Stauber, R., Gutfleisch, O., Schnell, S., Ratering, S:
    Critical raw materials – Advanced recycling technologies and processes,.
    Sustainable Minerals 18, 14 – 15. Juni .2018, Namibia
  • Bokelmann, K., Horn, D., Zimmermann, J., Gellermann, C., Stauber, R.:
    Recycling von Li-Ionen-Batterien: Elektrohydraulische Zerkleinerung.
    Chemie in unserer Zeit 52(5), 278-289 (2018)
  • Böse, H. Stier, S., Thuy, M.:
    Operation glove with different dielectric elastomer sensors.
    Proc. Euro EAP, Lyon, Frankreich
  • Böse, H., Thuy, M., Stier, S.:
    Wearable operation device with different types of dielectric elastomer sensors.
    Proc. of SPIE Vol. 10594 105940X p. 1-12
  • Dierks, C.:
    LCA of catalyst slag: Utilization as supplementary cement material. (Poster)
    LCIC 2018 conference (2018)
  • Dierks, C.:
    Recycling in der Ökobilanz: Wie adressieren wir Multifunktionalität?
    Recy & DepoTech 2018 Konferenz (2018)
  • Ebert, F., Oberbauer, A., Cabanero, M. A., Sextl, G., Lienkamp, M.:
    Simulation of lithium plating due to spatial inhomogeneous separator strain in lithium-ion-cells.
    EVS 31 & EVTeC 2018, Kobe, Japan, 1. – 3. Oktober 2018 
  • Hilgendorf, S., Homm, G., Gellermann, C., Stauber, R, Friedrich, B.:
    Pyrometallurgische Recyclingprozesse zur Aufarbeitung bleihaltiger Messingschrotte.
    Recycling und Rohstoffe, Band 11; hrsg. v. Thiel, Thomé-Kozmiensky, Goldmann; 2018; S. 319 – 331
  • Hilgendorf, S., Homm, G., Gellermann, C., Stauber, R., Friedrich, B.: 
    Pyrometallurgical recycling of leaded brass by formation and separation of Ca-Pb-intermetallics.
    Conference: Copper Alloys (2018)
  • Hilgendorf, S., Homm, G., Gellermann, C., Stauber, R., Friedrich, B.: 
    Selektive Metallurgie in der Kreislaufwirtschaft am Beispiel von Messingrecycling.
    Metall 72, 444-446 (2018)
  • Hoffmann, M., Schreiber, S., Schütze, F., Nique, S., Wolter, H.:
    Biodegradable organic thin film transistors.
    Book of Abstracts, BioEl2019 (International Winterschool on Bioelectronics Conference),  Kirchberg in Tirol, Austria, 16.-23. März 2019
  • Homm, G., Gellermann, C., Stauber, R.:
    Schlackenverwertung – aktuelle Beispiele und Perspektiven.
    Tagungsband des Schlacken-Symposiums 2018
  • Klein, M.:
    New materials for additive manufacturing,
    E-MRS Spring Meeting, Strasbourg, 18. – 22. Juni 2018 (2018)
  • Maurer, A., Lohmeier, R., Fröhlich, P., Frank, D., Gellermann, C., Bertau, M.:
    Phosphor und Phosphatrecycling: Das lebenswichtige Element.
    Chemie in unserer Zeit 52(5), 350-358 (2018)
  • Meinecke, Ch., Steenhusen, S., Korten, K., Groß, M., Domann, G., Diez, St., Lindberg, F., Reuter, D., Schulz, St. E., Linke, H.:
    Approach to combine electron-beam lithography and two-photon polymerization for enhanced nano-channels in network-based biocomputation devices.
    Tagungsband 34th European Mask and Lithography Conference EMLC2018, Grenoble, 18. – 20. Juni 2018
  • Nothacker K., Homm G., Stauber, R.:
    Reslag: Recycling von Stahlwerksschlacken.
    Recy & DepoTech 2018 Konferenz (2018)
  • Schreiber, S., Hoffmann, M., Schütze, F., Nique, S., Wolter, H.:
    Biodegradable organic thin film transistors.
    Conference LOPEC (Large-area, Organic & Printed Electronics Convention),
    München, 19.– 21. März 2019
  • Steenhusen, S., Burmeister, F., Groß, M., Domann, G., Houbertz, R., Nolte, S.:
    Heterogeneous microoptical structures with a precision below 1 µm.
    Tagungsband ICCG2018  (2018) 
  • Wulfert-Holzmann, P.:
    Innovative Materialien für stationäre Blei-Säure-Batterien.
    2. Statusseminar InnoEMat, Frankfurt, 29. – 30. Oktober 2018
Auerbach, R., Bokelmann, K., Stauber, R., Schnell, S., Ratering, S., Werner, A., Haseneder, R., Vostal, R., Bertau, M., Gellermann, C.:
Bioleaching zum Recycling von Sekundärrohstoffen,
Chemie in unserer Zeit 52(5), 330-340 (2018)
Homm, G., Gellermann, C., Stauber, R.:
Schlackenverwertung – aktuelle Beispiele und Perspektiven
Tagungsband des Schlacken-Symposiums 2018

2017

  • Brunner, B.:
    Silikonbasierte Sensorik und Aktorik für medizinische Diagnostik am Körper. Aachen-Dresden-Denkendorf International Textile Conference (2017)
  • Cabañero Martinez, M; Gebel, A.; Lorrmann, H.; Sextl, G.; Hein, S.; Kallo, J.; Latz, A.:
    Lithium Plating Simulations in Commercial Lithium-Ion Batteries during Low-Temperature Charging. 18. International Meeting on Lithium Batteries, IMLB 2016. Meeting abstracts. ECS - The Electrochemical Society. Red Hook, NY: Curran (2017)
  • Domann, G.:
    Bendable encapsulants and dielectrics to be used in backplanes of flexible displays. LOPEC 2017 online library (only available for participants of the conference)  (2017)
  • Ebert, F., Sextl, G., Adermann, J., Reiter, C., Lienkamp, M.:
    Detection of Cell-Stack Inhomogeneities via Mechanical SOC and SOH Measurement. 2017 IEEE Transportation Electrification Conference & Expo (ITEC)  (2017)
  • Ebert, F.; Sextl, G., Lienkamp, M.:
    Effect of a flexible battery module bracing on cell aging. 12. International Conference on Ecological Vehicles and Renewable Energies (EVER): Monaco, IEEE (2017)
  • Ehrlich, J., Görk, A., Brunner, B.:
    Powering electro active polymer generators with a constant voltage concept using passive components. Poster, EAP 2017
  • Frech, F., Lorrmann, H., Sextl, G.:
    Development of thin-film solid electrolyte-electrode system for all-solid-state applications. 18. International Meeting on Lithium Batteries, IMLB 2016. Meeting abstracts. - ECS - The Electrochemical Society. Red Hook, NY: Curran (2017)
  • Groten, J.,  Zirkl, Martin,, Collin, D., Domann, G., Stadlober, B.:
    Screen printed PVDF-TrFE-co-PbTiO3 nanocomposite for selective piezo- or pyroelectric sensing. ISE16 (16. International Symposium on Electrets, Leuven)
  • Klemm, H., Kunz, W., Wamser, T., Rüdinger, A., Wei├ƒ, R., Lauer, A., Wilhelmi, C., Machry, T., Hofmann. S. und Koch, D.:
    Hot Gas Stability of Various Ceramic Matrix Components. Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development: Ceramic Transactions, Volume 263. Selected Peer-Reviewed Papers from the 9. International Conference on High-Temperature Ceramic Matrix Composites 263 (2017) 253-260
  • Röder, M.; Posset, U.; Bünsow, J.; Guntow, U.; Lorrmann, H.; Guerfi, A.; Zaghib, K.; Sextl, G.:
    Lithium-Ion Thin-Film Electrodes for All-Solid-State and Electrochromic Applications. Meeting abstracts 18. International Meeting on Lithium Batteries, IMLB 2016 (2017)
  • Schneider, C,; Dembski, S.:
    Synthesis and Characterization of NIR Dye-doped Nanoparticles for in vivo Tumor Diagnostics. Tagungsband 2. World Congress on Recent Advances in Nanotechnology, Barcelona  (2017)
  • Settelein, J., Lorrmann, H.:
    Innovative Materialien für die stationäre Blei-Säure-Batterie von morgen. 1. InnoEMat-Statuskonferenz, Leipzig  (2017)
  • Steenhusen, S., Hasselmann, S., and Domann, G.:
    Strategies for rapid and reliable fabrication of microoptical structures using two-photon polymerization. Proceedings, SPIE, Photonics West, Proc. SPIE OPTO, Session 9: 3D Laser Lithography for Production, Paper Number 10115-30, San Francisco 28.1.-2.2.2017 // Digital Library  (2017)

2016

  • Auerbach, R., Bokelmann, K., Stauber, R., Schnell, S., Ratering, S.:
    Recycling of metals and rare earth elements from magnetic powder by means of bioleaching using acidophilic bacteria and fungi. Proceedings of 24th International Workshop on Rare Earth and Future Permanent Magnets and their Applications, Darmstadt (2016)
  • Böse, H., Ocak, D., Wirthmann, S., Ehrlich, J.:
    Kapazitive Elastomersensoren zur Detektion von Fingerdrücken. Tagungsband 18. GMA/ITG Fachtagung Sensoren und Messsysteme 2016 (2016)
  • Collin, D., Domann, G.:
    Printed P(VDF-TrFE) films and nanocomposite coatings as sensor materials on plastic substrates. Book of Abstracts (Extended Abstract) 11th International Conference on Coatings on Glass and Plastics ICCG (2016)
  • Deinhardt, A.:
    Systematic development of a low-melting lead-free glass decor. Book of Abstracts, (Extended Abstract) 11th International Conference on Coatings on Glass and Plastics ICCG (2016)
  • Drenkova-Tuhtan, A., Meyer, C., Schneider, M., Mandel, K., Gellermann, C., Franzreb, M., Steinmetz, H.:
    Application of magnetic microsorbents for separation, concentration and recovery of phosphate from wastewater streams. Proceedings of 13-th IWA Leading Edge Conference on Water and Wastewater Technologies, Jerez de la Frontera, Spain; 06/2016
  • Duerrschnabel, M.; Bruder, E.; Güth, K.; Gauss, R. K.; Gutfleisch, O.; Molina-Luna, L.:
    Nanoscale texture analysis of d-HDDR processed Nd-Fe-B powder particles. 16th European Microscopy Congress 2016. Abstracts. France. Lyon, 2016, Abstract 6013
  • Gauß, R., Brouwer, E., Buckow, A., Groth, N., Güth, K., Schönfeldt, M.,Rachut, K., Diehl, O., Dirks, A., Gassmann, J., Hord, R., Stauber, R., Gutfleisch, O.:
    Scrap magnets for new magnets. Advanced functional recycling approaches to Nd-Fe-B-magnets. Processings of 24th International Workshop on Rare Earth and Future Permanent Magnets and their Applications, Darmstadt
  • Gellermann, C-,Kazmierczak, K., Homm, G., Brämer, T., Stauber, R.:
    Rückgewinnung von Seltenerd- und Platingruppenmetallen aus Aufarbeitungs- und Produktionsrückständen. Tagungsband der 13. Recy & DepoTech Conference, Leoben (A), 2016, S. 189-192
  • Hartfeil, T., Grieger, S., Bokelmann, K., Herdegen, J., Bachmann, A.-L., Gellermann, C., Stauber, R.:
    Elektrohydraulische Zerkleinerung: Innovative Methode zum Recycling galvanisierter Kunststoffe. Tagungsband zur 13. Recy & DepoTech-Konferenz (2016) 739-742 (ISBN: 978-3-200-04777-8)
  • Herdegen, J., Benner, W., Bokelmann, K., Hartfeil, T., Gellermann, C.:
    Separationsmethoden zur Aufarbeitung von metallhaltigen Verbundwerkstoffen. Tagungsband Berliner Recycling- und Rohstoffkonferenz, Berlin; 03/2016
  • Hoffmann, J., Wolter, H., Nique, S.:
    Functionalized ORMOCER® resins as basis for highly aesthetic, load-stable and biocompatible dental materials. Tagungsband zur ECCM17 European Conference on Composite Materials, München
  • Lixandru, A., Poenaru, J., Güth, K., Gauß, R., Gutfleisch, O.:
    A systematic study of processing conditions for the recycling of end-of-life Nd-Fe-B magnets using HDDR. Proceedings of 24th International Workshop on Rare Earth and Future Permanent Magnets and their Applications, Darmstadt
  • Löbmann, P.:
    MgF2 Antireflective coatings by Sol-Gel processing: Preparation and Performance. Book of Abstracts (Extended Abstract) 11th International Conference on Coatings on Glass and Plastics ICCG (2016)
  • Lorrmann, H.:
    Echte Detektivarbeit - Qualitätskontrolle von Lithium-Ionen-Batterien. Material Innovativ 2016 - Werkstoffe und Fertigungstechnologien für die Mobilität von Morgen, Würzburg, 23.2.2016 (2016)
  • Mandel, K., Schneider, M., Gellermann, C., Drenkova-Tuhtan, A., Meyer, C., Steinmetz, H.:
    Superparamagnetische Partikel und ihre Anwendung in der Abwasserreinigung und der Rückgewinnung von Wertstoffen. Tagungsband nANO meets water VII - Nanotechnik für die Wasser-Praxis, Oberhausen; 02/2016
  • Poenaru, J., Lixandru, A., Dirks, A., Gassmann, J., Hord, R., Diehl, O.,Sawatzki, S., Buckow, A., Güth, K., Gauß, R., Gutfleisch, O.:
    Cerium-substituted Nanocrystalline Melt-spun NdFeB Alloys for Resource-efficient Permanent Magnets. Proceedings of 24th International Workshop on Rare Earth and Future Permanent Magnets and their Applications, Darmstadt
  • Riester, M.; Krupp, A.; Kühn, D.; Houbertz, R.; Steenhusen, S.:
    Additive manufacturing for optical network components. Optical Society of America, Washington/D.C.: CLEO: Science and Innovations 2016: Part of Conference on Lasers and Electro-Optics; San Jose, California, United States, 5-10 June 2016. Washington, DC: OSA, 2016, Paper AF2J.1
  • Ruess, F., Kücükpinar, E., Fahlteich, J., Amberg-Schwab, S., Holländer, A.:
    Inline determination of crosslinking degree via UV excited optical measurement system. Porceedings 9th International Symposium on Flexible Organic Electronics (ISFOE 16) (2016)
  • Stender, B.; Kühn, D.; Krupp, A.; Esslinger, M.; Steenhusen, S.; Houbertz, R.:
    High-precision 3D printing for the fabrication of photonic elements. Optical Society of America, Washington/D.C.: CLEO: Science and Innovations 2016: Part of Conference on Lasers and Electro-Optics; San Jose, California, United States, 5-10 June 2016. Washington, DC: OSA, 2016, Paper AF1J.3

2015

  • Ficker, F.; Olbrich, S.; Ottiger, R.:
    Textilforschung an der Hochschule Hof. Allgemeiner Vliesstoffreport anlässlich 30 Jahre Hofer Vliesstofftage 6 (2015) 40-42
  • Haas, K.-H.:
    Status of the Industrial Use of Nanomaterials. Proceedings 1. Joint Symposium on Nanotechnology, BfR Bundesinstitut für Risikobewertung (2015)
  • Steenhusen, S., Burmeister, F., Eckstein, H.-C., Houbertz, R.,:
    Two-photon polymerization of hybrid polymers for applications in micro-optics. Proceedings Photonics West 2015, Proc. SPIE 9353, Laser 3D Manufacturing II conference, 93530K  (March 16, 2015) San Francisco (USA), February 7-12, 2015; doi:10.1117/12.2079277 (2015)
  • Wolter, H.:
    ORMOCER®e: Von widerstandsfähigen dentalen Restaurationsmaterialien bis zu mechanisch einstellbaren biodegradierbaren Werkstoffen. Tagungsband Biomaterialien 2015, Forum MedTech Pharma (2015)
  • Wolter, H.:
    Enabling chairside indirect restauration with adapted ORMOCER®-based resins/composites. Composites at Lake Louise-2015, Lake Louise, Alberta, Canada, 8.-12. November 2015  (2015)